How to Reset Waste Ink

How to reset waste ink reseter full without using software.

1. Unplug the AC power behind the printer.
2. Press and hold the power button.
3. Input AC cord back in (the power button remained in detention)
4. Release the power button.
5. Turn the printer ..


METHOD 2:

How To Reset Printer Canon IP & MP Series

Steps Reset Ink Tank Full Error Canon iP Series and mP
First Stage (Hardware Reset)
1. Turn off the printer, then unplug the power cord.
2. Press and hold the POWER button on the printer. ... (Use your index finger to hold the POWER button this)
3. Replace the power cord. ... (Index finger still pressing the Power button)
4. Use the middle finger to press the Resume button 2 times.
5. Remove your index finger from the POWER button. ... .... (The printer will be detected again as a new printer)
6. You have completed the first phase to reset Ink Tank Full Error ... (flashing power light).

Proceed to Stage Two!
Phase Two (Software Reset) for Permanent
1. Download Resetter Canon IP (just googling)
2. Extract / Unrar downloaded file tesrebut in a folder, ... eg C: \ Resetter Printer
3. Make sure all files in the folder attributes are free from Read Only. ... How: select all the files (Ctrl A)> right click on one file> select properties> ... turn off a check in the Read-Only attributes> OK
4. Double-click GeneralTool.exe> will appear GeneralTool for application menu ...
5. In USB Port select the active port for your printer.
6. Select (check) in the EEPROM CLEAR.
7. Provide blank paper for printing. Then click the button TEST PATTERN 1.
8. Restartlah your computer, to detect a new printer does not appear again. Done.
Good luck, good luck!

Another way:
If you find a way above is not successful, then try to replace the cartridge with a new or have borrowed another friend, good luck!

TYPES AND TYPE PRINTER SOFTWARE RESET
Here are the types of Software Reset printer according to the type of printer to be reset. Usually a Software Reset can be used for several types of printers. As attached below:

1. RESETTER CANON iP1700, iP1300, ip6600, iP6000, iP6210, iP220D, mP8302. RESETTER CANON iP1200, iP1600, iP2200, iP4200, iP5200, mP1503. SOFTWARE RESETTER CANON i250, i255, i320, i350, i3554. SOFTWARE RESETTER CANON PIXMA ip1000, iP15005.

SOFTWARE RESETTER EPSON
CX-4600, CX-5300, CX-5100, RX420, RX425, RX620, R1800, C50, C60, C61, C62, C20/C40, C43, C45, C41, C46, C65, C85, C86, CX-3600, CX-6600, R800, SC-740, RX600, Stylus400, 440, 480LPT, 480SXU/580, Stylus600, 640, 660, 670, 680/777, 740, 760, 800/850, 860, 880, 900/EM- 900C, 980, 1160, 1520, 3000, C63, C64, C70, C80, C82, C83/C84, C85/C86, CX3100/3200, Cx3600, CX5200, CX5400, CX6400, Photo EX, Photo700/IP-100, 750 / PM-770c, 780/790, 810/820, 825/915, 830/830U, 870/PM-875DC, R200/210, R300, R800, RX500, RX600, 890, 895/785EPX, 900, 925/934 , 950/PM-950C, 1200/PM-3000C, 1270/PM-3300C, 1290.2200 / PM-4000EPX, 5000/PM-5000C.
CANON iP1200, iP1600, iP2200, iP4200, iP5200, mP150

First Stage (Hardware Reset)
1. Turn off the printer, then unplug the power cord
2. Press & hold the POWER button printers use the index finger
3. Replace the power cord
4. Use the middle finger to press the Resume button 2 times
5. Remove your index finger from the button POWER
6. You have completed the first phase to reset Ink Tank Full Error (power light blinking)

Phase Two (Software Reset) for Permanent
1. Download resetter applications (large file 9.7 MB)
2. Extract / Unrar the folder C: \ IP1200
3. Make sure all file attributes from Read Only
4. Run GeneralTool.exe
5. In USB Port select your printer port
6. Select (check) the EEPROM CLEAR
7. Provide blank paper to print, then click the Test Pattern 1
8. Done, IP1200 and IP1600 printer you back to normal